How to Fix Error Code 0x0000000F in Windows 10

The error code 0x0000000F is a common error in Windows PC, including Windows 7 and Windows 8. This error occurs because BOOTMGR cannot find BCD files. These files may be missing from your PC due to some issues like disk-write errors, viruses, power outage, etc. It is a blue screen error that comes in many forms when you boot your operating system.

Here are some messages that appear with the error code 0x0000000F:

• Your computer needs to repaired 0x0000000F
• Startup error 0x0000000F
• Spinlock already owned error 0x0000000F
• Admission violation reading location 0x0000000F
• Network boot status 0x0000000F
• Boot error 0x0000000F
• Unexpected kernel mode trap error 0x0000000f ntkrnlpa.exe 3f476

How to Fix Error Code 0x0000000F in Windows 10

In this article, we have mentioned four possible solutions to fix error code 0x0000000F easily and conveniently.

• Turn on BSOD troubleshooter
• Throw Windows memory test RAM healths
• Boot into Windows safe more to pass error 0x0000000F
• Recover missing driver and reset corrupt drivers

1) Turn on BSOD Troubleshooter

Here are the steps to follow:

1. Tap Windows + I hotkey to launch settings on your windows operating system.
2. In the settings location, click on the “Updates and Security” button.
3. Now, click on “Troubleshooter” that appears on the left-side panel.
4. Tap “Blue Screen” that appears on the right-side panel.
5. Now you need to tap on the “Run the troubleshooter” option.

After the above process, you need to reboot your operating system. If there is a problem with RAM, then you need to use another solution.

2) Throw Windows Memory Test RAM Health

Here are the steps to follow:

1. Tap Windows + R key to the open start menu.
2. On the start, menu search bar, type “Windows memory,” and then click “Windows Memory Diagnostic” on the result that appears on your screen.
3. Here you can see two options, click on “Restart now to check for problems.”
4. After the process, your operating system will restart and find the blue screen memory issue.
5. When the memory check process finishes, you need to reboot your operating system again.
6. After rebooting your device, tap on the “Notification” area in the system tray to check the diagnostics.

3) Boot into Windows Safe More to Pass Error 0x0000000F

Here are the steps to follow:

1. Tap the Windows + R key on your keyboard to launch the “Run” dialog box.
2. In the run dialog search field, type “msconfig” and then tap “Enter” on your keyboard to start system configuration features.
3. Now move to the “Boot tab” and then tap on the “Boot option” field.
4. Here you need to check “Safe boot” and remember the Minimal radio option is selected.
5. Bow, tap on the “Apply” features, and then tap “OK” to save changes you have done.
6. Now restart your pc, and rapidly tap the F8 key continuously.
7. Now you will come to the “Startup Settings” display, and here you can see several startup modes are listed.
8. Tap on the number that corresponds to the “Enable safe Mode” button to root your operating system into a safe Mode.

4) Recover Missing Driver and Reset Corrupt Drivers

Here are the steps to follow:

1. Right-tap on the Windows taskbar to start.
2. Select “Task Manager” under the contextual menu.
3. On the upper left corner on your screen, tap on “File” and then hit “Run new task.”
4. In the search field, type “cmd.”
5. Mark on the box labeled “create a task with administration.”
6. Tap the “OK” option to start the command prompt as admin.
7. In the command search field, type “-sfc /scannow” and then tap the “Enter” key to run the command.
8. Your operating system starts an investigation and finds the issue to fix.
   
   Abigail Smith is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on myblog-search and many other related topics. He is a very knowledgeable person with lots of experience.